T6063 Material Garden Safety Walkway Aluminum Walkway Grating For Construction
Product Description
Swaged Grating
Swage-locked aluminum grating is manufactured with either an "I" or rectangular bearing bar. These
bearing bars are permanently locked to the cross rods with a swaging process which reshapes the
cross rods. Because of flange width, I-bars reduce the open spaces of the grating, yet I-bar
swage-locked is lighter weight and maintains load ratings. Swage-locked I-bar grating is the most
widely used and provides the strength equal to a rectangular bar of the same depth, but at far less
weight. Rectangular swage-locked is available with the cross rods flush with the top of the bearing bars,
or with the cross rods near the middle of the bearing bar. These options are available if a specific look is desired.
Rectangular v I-Bar Grating
Both rectangular and I-bar aluminum grating offer comparable strength.
Rectangular bar is offered in various crossbar configurations and can be either plain or serrated.
I-bar is only available in a swaged connection and is always striated. This bar is lighter weight than
rectangular bar and is a great option for any project that has weight limit restrictions.
Product Type&Specification
Aluminum Press Lock Bar Grating:
Bar grating made up of interlocking perpendicular bars
Bearing bar sizes range from 1" x 1/8" through 2-1/2" x 3/16" in 1/4" increments
Bearing bar spacing of 1-3/16", 15/16", 11/16" and 7/16" c.c. with cross bar spacing of 4" or 2"
Hydraulic pressure is used to bond the slotted bars together, locking the deep cross bar into the notched bearing bar
Smooth, clean look due to a flush top rectangular cross bar
Offers strong lateral stability
Used in architectural design because of clean look and tight spacing
1/4" and 1/2" openings conform to the “Americans with Disabilities Act” (July, 1991)
Slip resistant surfaces for floor grating available upon request
Aluminum Flush Top Bar Grating:
Pressure locked by permanently attaching cross bars to bearing bars through a pressure applied swaging process
Bearing bar sizes range from 1" x 1/8" through 2-1/2" x 3/16" in 1/4" increments
Bearing bar spacing of 1-3/16", 15/16", 11/16" and 7/16" c.c. with cross bar spacing of 4" or 2"
Press locked bar grating serrated surface can be provided on aluminum grating when skid resistance is needed
Product Specifications
| Aluminum grating | Part Number | Bearing bar size |
| I-Bar Swage Locked | 19-SI-4
15-SI-4
11-SI-4 | (1-3/16")
(15/16")
(11/16") |
| I-Bar Swage Locked Close-Mesh | 8-SI-4 | (1/2") |
| Rectangular Bar Swage-Locked & Press Locked | 19-SR-4,19-AP-4
15-SR-4, 15-AP-4 | (1-3/16")
(15/16") |
| Press-Locked Close Mesh | 3-AP-4 | (13/16") |
| Rectangular Bar Swage-Locked Close Mesh &Press-Locked Close Mesh | 11-SR-4, 11-AP-4
10-AP-4
8-SR-4, 8-AP-4
7-AP-4 | (11/16")
(5/8")
(1/2")
(7/16") |
Product Differences
STANDARD ALUMINUM GRATING
Aluminum - Bearing Bars - 1-3/16” centers. Type 19P - Standard Bar. Type 19I - I Bar.
CLOSE MESH ALUMINUM GRATING
Aluminum - Bearing bars at 15/16". Type 15P - Standard Bar. Type 15I - I Bar.
Aluminum - ADA Compatible with 3/16” bars. Bearing bars at 11/16" centers. Type 11P - Standard Bar. Type 11I - I Bar.
Application
| 1 | Storage facilities |
| 2 | processing plants |
| 3 | Food preparation |
| 4 | bottling facilities |
| 5 | Breweries |
Advantage
Our aluminum bar grating does not produce sparks, which means it can also be safely used in munitions plants and other potentially volatile manufacturing operations where fire and explosion pose a constant threat.
Product Tags:
|
|
Swage Locked T6063 Aluminum Bar Grating Garden Safety Walkway For Construction Images
|
